The DDJ-REV1 matches perfectly with the free Serato DJ Lite software, boasting a brand-new battle-style layout that’s easy to use and perfect for playing like a pro. The design of this 2-channel DJ controller emulates a professional DJM-S mixer PLX turntable setup, including specialized features for open-format and scratch DJs. There’s plenty of space to perform mixing and scratching techniques thanks to the new arrangement of the controls on the DDJ-REV1. The tempo sliders are 60mm – longer than those on the DDJ-SB3 to give you finer control – and they run horizontally above the decks while the Performance Pads have been moved into the mixer section so you can intuitively combine effects, trigger samples, and scratch your tracks. Bigger jog wheels for better scratching. The jogs on the DDJ-REV1 are the same size as the ones on the DDJ-SR2, a popular controller that’s higher up in their range. The Tracking Scratch feature silently takes the music back to the cue point the moment you move the jog wheel from backward to forward or lift your hand away – saving you from closing the fader and finding the right place in the music to start the scratch again. All you need to do is to select the Tracking Scratch Pad mode, press a Performance Pad to choose the Scratch Crossfader Cuts pattern you want to use, then start moving the jog. For the first time in a Pioneer DJ controller at this level, the output of the master audio is mixed with the sound from the microphone if you have one plugged in. This means you don’t need any external equipment such as a soundcard or separate mixer if you want to add speech or vocals to your performance and route it through your computer. All sounds are sent to Serato DJ Lite so you can stream from there. As soon as you’ve downloaded Serato DJ Lite to your PC/Mac for free, you can simply connect the DDJ-REV1 via the supplied USB cable and start DJing. Specs Frequency Range 20 – 20000 Hz Width 526 mm Height 59.2 mm Depth 255.5 mm Weight 2.1 kg Soundcard 24 bit/48 kHz Signal-to-Noise Ratio 103 dB Distortion < 0.005 % Power Supply USB Type-B bus powered Power Consumption 5V 500mA Channels 2 Deck Control 4 Trim knob Yes Jog Wheel 154 mm Filter Sampler Hot Cues Hot Cue Auto Loop Tracking Scratch Sampler Trans Scratch Bank Manual Loop Autoloop Channel Fader Start Crossfader Start Crossfader Curve Adjust Inputs 1 MIC (1/4 inch TS Jack) Outputs 1 MASTER (RCA) 1 PHONES (3.5-mm stereo mini jack) 1 USB B port How to find us? Total Sounds Unit C5, Weldale Street, Reading, Berkshire, RG17BX Telephone: 01189 510050 Email: [email protected]. Ask a Question Full Name * Email * Subject Your Message
